Air Sealing in Atlantis, Florida
Systematic sealing of the building envelope — top plates, penetrations, rim joists, windows and doors — the step that makes every other upgrade work.
Air Sealing for Atlantis Properties
Insulation slows heat conduction. It does nothing to stop air from moving straight through and around it. A home with excellent R-value and a leaky envelope behaves like a wool sweater with the front unzipped — which is why air sealing precedes insulation on every job we do.
In Palm Beach County generally, and Atlantis specifically, this comes up most often on properties where the existing assembly has stopped performing and a straightforward top-up will not solve the underlying problem.
Atlantis sits in Palm Beach County, climate zone 2A, where the recommended attic target is R-49 to R-60. That number, along with where your ductwork runs and what condition the existing assembly is in, is what determines the right specification for your property.
Air Sealing at a glance
R-value: Measured in ACH50 reduction rather than R-value
Installed cost: $900 – $3,200 for whole-home air sealing
Service life: Permanent with quality sealants
Available in: Atlantis and throughout Palm Beach County
Types and Methods
Find the leaks
A blower door depressurizes the house so we can measure total leakage in ACH50 and locate the actual paths with thermal imaging and smoke. Guessing wastes sealant on the wrong places.
Seal the big holes first
Attic top plates, plumbing and wiring chases, dropped soffits, recessed lighting, bath fans, the attic hatch and duct penetrations account for the large majority of leakage in a Florida home. These get foam, caulk and rigid covers as appropriate.
Then the details
Window and door perimeters, rim joists, electrical boxes on exterior walls, dryer vents, hose bibs and cable entries. Individually small, collectively significant.
A house can be sealed too tight without a mechanical ventilation strategy. We run combustion safety testing on any home with gas appliances and will recommend balanced ventilation when the numbers call for it. Build tight, ventilate right.
Benefits for Atlantis Property Owners
- Cuts the humid outdoor air infiltration that drives Florida indoor humidity
- Makes the insulation you already own perform at its rating
- Reduces dust, pollen and outdoor allergen entry substantially
- Eliminates drafts and cold or hot spots along exterior walls
- Reduces pest and insect entry pathways
- Typically 10–20% HVAC savings on its own
Best Applications
- Drafty homes
- High humidity indoors
- Dust accumulation
- Uneven room temperatures
- Any project where insulation is being added
How We Install It in Atlantis
- Blower door test to establish a documented baseline ACH50
- Thermal imaging and smoke testing to map the actual leakage paths
- Prioritized sealing plan starting with the largest openings
- Two-part foam, fire-rated caulk and rigid covers applied as appropriate
- Attic hatch weatherstripped and insulated to match the attic
- Post-seal blower door retest with before-and-after numbers
- Combustion safety and ventilation check to confirm the home is not over-tightened
Cost and R-Value Reference
| Material | Installed cost | R-value per inch | Service life |
|---|---|---|---|
| Blown-in fiberglass | $1.10 – $2.00 / sq ft | R-3.2 – R-3.8 | 20–30 years |
| Blown-in cellulose | $1.20 – $2.40 / sq ft | R-3.2 – R-3.8 | 20–30 years |
| Fiberglass batts | $0.90 – $2.10 / sq ft | R-3.1 – R-4.3 | 25+ years |
| Mineral wool | $1.60 – $3.40 / sq ft | R-3.0 – R-4.3 | 50+ years |
| Open-cell spray foam | $1.50 – $3.20 / sq ft | R-3.6 – R-3.8 | 80+ years |
| Closed-cell spray foam | $2.40 – $4.90 / sq ft | R-6.0 – R-7.0 | 80+ years |
| Rigid foam board | $1.40 – $3.80 / sq ft | R-3.8 – R-6.5 | 50+ years |
| Radiant barrier | $0.55 – $1.90 / sq ft | Reflective (no R) | 25+ years |
| Insulation removal | $1.10 – $2.90 / sq ft | — | One-time |
Pricing reflects typical Florida installed costs and varies with access, square footage and site conditions.
Air Sealing FAQs — Atlantis
How much does air sealing cost in Atlantis?
Typical installed pricing in Atlantis runs $900 – $3,200 for whole-home air sealing. Final cost depends on square footage, access, target R-value and whether existing material has to be removed first. Every quote itemizes material, R-value, installed inches and square footage.
What R-value will I get?
Measured in ACH50 reduction rather than R-value. Atlantis is in climate zone 2A, where the attic target is R-49 to R-60, so installed depth is calculated from that target.
How long does it last?
Permanent with quality sealants.
How soon can you start in Atlantis?
Inspections typically within two to four business days, installation within one to two weeks. Emergency storm work is prioritized ahead of scheduled projects.
Other Services in Atlantis
- Spray Foam Insulation in Atlantis
- Blown-In Insulation in Atlantis
- Fiberglass Batt Insulation in Atlantis
- Attic Insulation in Atlantis
- Radiant Barrier Insulation in Atlantis
- Insulation Removal in Atlantis
- Crawl Space Insulation in Atlantis
- Wall Insulation in Atlantis
- Mineral Wool Insulation in Atlantis
- Rigid Foam Board Insulation in Atlantis
- Duct Insulation and Sealing in Atlantis
- Soundproofing Insulation in Atlantis
- Metal Building Insulation in Atlantis
Air Sealing Nearby
- West Palm Beach
- Boca Raton
- Boynton Beach
- Delray Beach
- Jupiter
- Palm Beach Gardens
- Wellington
- Royal Palm Beach
- Lake Worth Beach
- Riviera Beach
- Greenacres
- Palm Springs
- Belle Glade
- North Palm Beach
- Tequesta
- Lantana
- Palm Beach
- Juno Beach
- Pahokee
- South Bay
- Highland Beach
- Manalapan
- Ocean Ridge
- Gulf Stream
- Briny Breezes
- Hypoluxo
- Lake Park
- Loxahatchee Groves
- Mangonia Park
- Cloud Lake
- Glen Ridge
- Golf
- Haverhill
- Jupiter Inlet Colony
- Lake Clarke Shores
- Palm Beach Shores
- South Palm Beach
- Westlake
- Wellington
Air Sealing Estimates in Atlantis, FL
Free attic inspection, photographs of what we find, and a written scope with material, R-value, inches and square footage. No obligation.