★★★★★ 5.0 Google rating  ·  Free estimates  ·  All 67 Florida counties Open 24 hours, 7 days(561) 409-7002
GoldStarInsulation · Florida
GoldStar InsulationHome 14 disciplinesServices
Spray Foam InsulationBlown-In InsulationFiberglass Batt InsulationAttic InsulationRadiant Barrier InsulationInsulation RemovalCrawl Space InsulationWall InsulationMineral Wool InsulationRigid Foam Board InsulationDuct Insulation and SealingAir SealingSoundproofing InsulationMetal Building Insulation
ResidentialCommercialAreas ServedBlogFAQsAbout Contact Get your free estimate Call (561) 409-7002
Edgewood, FL · Orange County · Zone 2A

Mineral Wool Insulation in Edgewood, Florida

Rock and slag wool batts and boards offering non-combustible fire resistance, superior acoustics and water repellency.

Mineral Wool Insulation for Edgewood Properties

Mineral wool is spun from molten basalt rock and steel-mill slag. It melts above 2,000°F, repels liquid water while remaining vapor-open, and outperforms fiberglass on sound. Where fire ratings, acoustics or moisture durability drive the specification, it is usually the right answer.

The question we get asked most in Edgewood is whether this is the right material for the property, and the honest answer is that it depends on where your ductwork runs, what your walls are made of, and what problem you are actually trying to solve.

Edgewood sits in Orange County, climate zone 2A, where the recommended attic target is R-49 to R-60. That number, along with where your ductwork runs and what condition the existing assembly is in, is what determines the right specification for your property.

Mineral Wool Insulation at a glance
R-value: R-3.0 to R-4.3 per inch
Installed cost: $1.60 – $3.40 per square foot installed
Service life: 50+ years; will not slump, rot or absorb water
Available in: Edgewood and throughout Orange County

Mineral wool insulation installed in a fire-rated commercial wall assembly, with safing at the slab edge and firestopping at penetrations — Mineral Wool Insulation in Edgewood, Florida
Mineral Wool Insulation on a Edgewood, Florida property.

Types and Methods

Batts for framed assemblies

Dense, semi-rigid batts that friction-fit tightly and hold their own weight without sagging — a real advantage in tall walls and overhead applications.

Rigid board for continuous insulation

Comfortboard-type products install outside the sheathing as a non-combustible continuous layer that still allows the assembly to dry. Common on commercial rainscreen facades.

Safing and firestopping

High-density mineral wool packs perimeter slab edges and joints in rated assemblies, a standard requirement in mid-rise and high-rise construction.

Cutaway of a soundproofed interior wall showing mineral wool cavity insulation, resilient channel decoupling, double drywall with damping compound and acoustic sealant at the perimeter — Edgewood, FL
Mineral Wool Insulation installed by our Orange County crew.

Mineral wool costs more per square foot than fiberglass, so it earns its place where its specific strengths matter — rated assemblies, noise control, mechanical rooms, and areas with elevated moisture exposure. We will not upsell it where standard fiberglass performs identically.

Benefits for Edgewood Property Owners

  • Non-combustible with a melting point above 2,000°F
  • Typically 8–12 STC points better than fiberglass in the same cavity
  • Hydrophobic — sheds water yet stays vapor-permeable
  • Dimensionally stable; no sag, no settling, no slump
  • Made largely from recycled slag and abundant natural rock
  • Offers no nutritional value to mold, pests or vermin

Best Applications

  • Fire-rated wall and floor assemblies
  • Mechanical and electrical rooms
  • Party walls in multifamily buildings
  • Recording studios and media rooms
  • Commercial kitchens and restaurants

How We Install It in Edgewood

  1. Confirm the required fire rating and applicable UL assembly
  2. Select density and thickness to match both thermal and acoustic targets
  3. Cut with a serrated blade for tight, gap-free friction fits
  4. Install with proper clearance around recessed and heat-producing fixtures
  5. Complete firestopping at all penetrations in rated assemblies
  6. Photo-document the assembly for inspector sign-off
  7. Coordinate with drywall and MEP trades for correct sequencing
Installer fitting unfaced fiberglass batt insulation into open wood stud wall cavities on a Florida new construction site, cut to fit around electrical wiring and outlet boxes — Edgewood, Florida
Verified results on every Edgewood project.
Four-step insulation project process: free assessment, written scope, clean installation, and final verification walkthrough
Assessment, written scope, clean installation and verification — on every Edgewood project.

Cost and R-Value Reference

Typical installed insulation costs in Florida by material
MaterialInstalled costR-value per inchService life
Blown-in fiberglass$1.10 – $2.00 / sq ftR-3.2 – R-3.820–30 years
Blown-in cellulose$1.20 – $2.40 / sq ftR-3.2 – R-3.820–30 years
Fiberglass batts$0.90 – $2.10 / sq ftR-3.1 – R-4.325+ years
Mineral wool$1.60 – $3.40 / sq ftR-3.0 – R-4.350+ years
Open-cell spray foam$1.50 – $3.20 / sq ftR-3.6 – R-3.880+ years
Closed-cell spray foam$2.40 – $4.90 / sq ftR-6.0 – R-7.080+ years
Rigid foam board$1.40 – $3.80 / sq ftR-3.8 – R-6.550+ years
Radiant barrier$0.55 – $1.90 / sq ftReflective (no R)25+ years
Insulation removal$1.10 – $2.90 / sq ft—One-time

Pricing reflects typical Florida installed costs and varies with access, square footage and site conditions.

Mineral Wool Insulation FAQs — Edgewood

How much does mineral wool insulation cost in Edgewood?

Typical installed pricing in Edgewood runs $1.60 – $3.40 per square foot installed. Final cost depends on square footage, access, target R-value and whether existing material has to be removed first. Every quote itemizes material, R-value, installed inches and square footage.

What R-value will I get?

R-3.0 to R-4.3 per inch. Edgewood is in climate zone 2A, where the attic target is R-49 to R-60, so installed depth is calculated from that target.

How long does it last?

50+ years; will not slump, rot or absorb water.

How soon can you start in Edgewood?

Inspections typically within two to four business days, installation within one to two weeks. Emergency storm work is prioritized ahead of scheduled projects.

Mineral Wool Insulation Estimates in Edgewood, FL

Free attic inspection, photographs of what we find, and a written scope with material, R-value, inches and square footage. No obligation.